Limited Edition, Gtones in Purple Stain finish with Auratone A2-30 amplifier.
Pair of hand-crafted reference monitors using top-quality lumber with a beautiful, vintage lacquer. Features a 4.5” - 8 ohm driver and Gold-plated binding posts.
Every speaker is unique because we use 100% solid wood. No MDF, or veneers.
Cabinet Specs
Dimensions: 6-1/2"w x 6-1/2"h x 5-1/2"d
Enclosure Type: Sealed, Solid Oak
Input Type: Banana/Bare-Wire Biding Post
Driver Specs:
Nominal Diameter4-1/2"
Power Handling (RMS)15 Watts
Power Handling (max)30 Watts
Impedance8 ohms
Frequency Response 100 to 10,000 Hz
Sensitivity91 dB 1W/1m
Voice Coil Diameter 1"
Amplifier Specs:
THD+N @ 1kHz 1W/8 ohms (both channels driven)0.03%
THD+N @ 1kHz 30W/8 ohms (both channels driven)0.05%
Power @ 1kHz 1% THD+N (both channels driven)23W + 23W @ 8 ohms
Voltage Gain20dB
Crosstalk@ 1kHz +4dBu <70dBu
Input Sensitivity 1.228Vrms (+4dBu)
Frequency Response(+/- 0.4dBu) 20 – 20kHz
Signal-to-Noise Ratio>100dB
ControlsAC power switch on back
LED IndicatorsPower (green) on front
Power115 – 230VAC
Power Consumption @ Idle (120VAC)6.4W
Fuse (120VAC)T1.6 A 5x20mm
Input Connectors(balanced) XLR-F Pin 2 Hot
Output Connectors5-Way Gold Binding Posts
Dimensions (H x W x D)45mm x 170mm x 180mm / 1.8" x 6.7" x 7.1"
Weight1.25kg / 2.75lbs
Limited Edition, Gtones in Purple Stain finish with Auratone A2-30 amplifier.
Pair of hand-crafted reference monitors using top-quality lumber with a beautiful, vintage lacquer. Features a 4.5” - 8 ohm driver and Gold-plated binding posts.
Every speaker is unique because we use 100% solid wood. No MDF, or veneers.
Cabinet Specs
Dimensions: 6-1/2"w x 6-1/2"h x 5-1/2"d
Enclosure Type: Sealed, Solid Oak
Input Type: Banana/Bare-Wire Biding Post
Driver Specs:
Nominal Diameter4-1/2"
Power Handling (RMS)15 Watts
Power Handling (max)30 Watts
Impedance8 ohms
Frequency Response 100 to 10,000 Hz
Sensitivity91 dB 1W/1m
Voice Coil Diameter 1"
Amplifier Specs:
THD+N @ 1kHz 1W/8 ohms (both channels driven)0.03%
THD+N @ 1kHz 30W/8 ohms (both channels driven)0.05%
Power @ 1kHz 1% THD+N (both channels driven)23W + 23W @ 8 ohms
Voltage Gain20dB
Crosstalk@ 1kHz +4dBu <70dBu
Input Sensitivity 1.228Vrms (+4dBu)
Frequency Response(+/- 0.4dBu) 20 – 20kHz
Signal-to-Noise Ratio>100dB
ControlsAC power switch on back
LED IndicatorsPower (green) on front
Power115 – 230VAC
Power Consumption @ Idle (120VAC)6.4W
Fuse (120VAC)T1.6 A 5x20mm
Input Connectors(balanced) XLR-F Pin 2 Hot
Output Connectors5-Way Gold Binding Posts
Dimensions (H x W x D)45mm x 170mm x 180mm / 1.8" x 6.7" x 7.1"
Weight1.25kg / 2.75lbs
